FYI - TI Shunt Regulator PSpice Models
Update your simulators...
Wasted an hour with older, 2.495vdc TL431 model...
TLVH431 - low voltage 1.24vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TLVH431 - TI.com
PSpice Transient Model (06 Sept 2012)
http://www.ti.com/litv/zip/slvm672
TLV431 - low voltage 1.24vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TLV431 - TI.com
PSpice Family PSpice Transient and AC Model (Rev A) (14 Dec 2009)
http://www.ti.com/litv/zip/slim005a
TL431 - Shunt Regulator 2.495vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TL431 - TI.com
PSpice Family PSpice Transient and AC Model (Rev A) (14 June 2009)
http://www.ti.com/litv/zip/slvm071a
Note: TL431 will not work with VSSA Lateral MosFet Amplifier.
2.495vdc Vmin is too high.
Update your simulators...
Wasted an hour with older, 2.495vdc TL431 model...
TLVH431 - low voltage 1.24vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TLVH431 - TI.com
PSpice Transient Model (06 Sept 2012)
http://www.ti.com/litv/zip/slvm672
TLV431 - low voltage 1.24vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TLV431 - TI.com
PSpice Family PSpice Transient and AC Model (Rev A) (14 Dec 2009)
http://www.ti.com/litv/zip/slim005a
TL431 - Shunt Regulator 2.495vdc
Datasheet: Voltage Reference - Shunt Voltage Reference - TL431 - TI.com
PSpice Family PSpice Transient and AC Model (Rev A) (14 June 2009)
http://www.ti.com/litv/zip/slvm071a
Note: TL431 will not work with VSSA Lateral MosFet Amplifier.
2.495vdc Vmin is too high.
Exactly, that's why TLVH431DQ, SOT-23-3, Texas Instruments, is specified in VSSA BOM. Anyway this shunt regulator will be pre-installed on VSSA PCB.Note: TL431 will not work with VSSA Lateral MosFet Amplifier.
2.495vdc Vmin is too high.
Many thanks for PSpice Models.
Hi to all VSSA GB members
Just to inform you that quotations started to send out today. All of you will receive Proforma Invoices before Sunday.
Best regards, Andrej
Hi Andrej,
I received my invoice and I am disappointed with the method of payment you chose. I travel every year to Europe and I have the same problem renting apartments from people that do not realize that the bank transfers from outside Europe are very expensive and the IBAN does not work from US.
I did a little bit of research and I came upon this:
“Transferring funds to European countries has been made simpler with the introduction of the International Bank Account Number (IBAN). The IBAN was developed by the International Organization for Standardization (ISO) and adopted by the European Committee for Banking Standards in order to encourage hassle free cross-border transfers throughout Europe.
The purpose of the IBAN is to make it possible to identify an account held at a bank anywhere in the world.
By having a standardized international account number, money transfers can be made both quickly and safely.
Where Are IBAN Transfers Available?
IBAN bank transfers are available in Europe only, and are often the cheapest way to transfer money internationally. IBAN transfers have become tremendously popular among expatriates of Eastern Europe EU countries like Poland and Lithuania who are living in Western European countries like the UK, France and Germany. They use the IBAN transfers to remit money safely and cheaply to their relatives back home.
IBAN transfers are not available in the United States of America, and are not likely to be, with the decentralized structure of the US banking system and lack of nationwide banks as compared to Europe. Electronic account-to-account transfers are often called wire or ACH transfers in the USA.”
The complete article is here:
IBAN Money Transfers | SpeedyPay.info
I will appreciate if you reconsider by accepting PayPal, including the PayPal fee in the total for the invoice.
Thank you,
Michael
I request the same. I have paypal account, please accept paypal, I'll pay any Paypal commission for this transaction
+1.
VSSA GB Info
Dear VSSA GB members
Yes, of course you can make the payment to PayPal account: esl@siol.net
In this case add extra 5% to the Total Price amount in the Proforma Invoice.
But please, do not forget to state Proforma Invoice number and your name, just to know exactly from whom the payment came.
Regards,
Andrej
Dear VSSA GB members
Yes, of course you can make the payment to PayPal account: esl@siol.net
In this case add extra 5% to the Total Price amount in the Proforma Invoice.
But please, do not forget to state Proforma Invoice number and your name, just to know exactly from whom the payment came.
Regards,
Andrej
where about is the latest schematic on this little fellow..??
Hi MiiB
Please, it doesn't worth to bother with sch, it's really not important, since the VSSA module is so small and well designed, also nothing to repair there hehe
I know your speakers would sound great in active version with VSSA and SMPS. Why not buy few and test?
Please, it doesn't worth to bother with sch, it's really not important,
Hi MiiB
Please, it doesn't worth to bother with sch, it's really not important, since the VSSA module is so small and well designed, also nothing to repair there hehe
I know your speakers would sound great in active version with VSSA and SMPS. Why not buy few and test?
Is there something important in the GB participants only to send secret schematic beyond housekeeping that can make a whole lot of difference to a self made previously published VSSA aside the physical board design advantages? If there is crucial differentiation not published to a GB we have to move it to vendors area as it is considered a non disclosed real product offering then.
Is there something important in the GB participants only to send secret schematic beyond housekeeping that can make a whole lot of difference to a self made previously published VSSA aside the physical board design advantages? If there is crucial differentiation not published to a GB we have to move it to vendors area as it is considered a non disclosed real product offering then.
Hi Salas
Schematic is the same as published in post #300.
I'm just sayin that is really hard to improve something and to stay in the same size or parts count, so why bother was meant in this way. Still someone can do own PCB or experiment.
Last edited by a moderator:
From what I understand, since http://www.diyaudio.com/forums/solid-state/225747-vssa-lateral-mosfet-amplifier-15.html#post3314786 two trimmers have been added for VAS current/DC-balance adjustments. While I think that this schematic should be published here there is certainly no hurry doing so. I suspect that LC spends a lot of his time organizing this GB right now.
- Home
- Vendor's Bazaar
- VSSA Lateral MosFet Amplifier