Go Back   Home > Forums > Blogs > Rob's active 3way with transconductance chipamps build blog

My build blog for my active 3 ways.
Rate this Entry

3 way post #6 - the cabinet

Posted 14th November 2009 at 06:35 PM by relder

A Wilson type setup - the mid/tweet box is separate from the woofer box. The upper box is open front and back - replaceable baffles on both sides in case I care to change something, either drivers or sealed vs. open back.

The bottom cab is MDF. I had some of that concrete board left over from an outdoor kitchen project and figred I'd laminate it to the front baffle under the woofer. I don't think it was worth the effort. A knuckle rap test on the sides vs. front showed no huge difference.

The top cab is MDF laminated with baltic birch.
Attached Thumbnails
Click image for larger version

Name:	open_cab.jpg
Views:	515
Size:	91.9 KB
ID:	36   Click image for larger version

Name:	full-cab.jpg
Views:	625
Size:	89.1 KB
ID:	37  
Posted in 3 Way
Views 611 Comments 0
Total Comments 0



New To Site? Need Help?
Copyright 1999-2017 diyAudio